STEP 1 : Catch in some black hackle fibres along the hookshank to form a tail.
STEP 2 : Catch in a long black cock hackle. Make sure that the body is level and finish winding with the thread near the eye.
STEP 3 : Wind the cock hackle in close turns to give a "bushy" effect, the cock hackle should have barbs at least 1.5 times the width of the hook bend. Secure the cock hackle and trim the waste.
STEP 4 : Catch in a white cock hackle at the position where the black cock hackle was tied off.
STEP 5 : Wind the white cock hackle a few times and secure. The white cock hackle should have barbs slightly longer than those used on the body hackle.
STEP 6 : Trim the waste, create a neat head and varnish.