STEP 1 : Place a 2mm Black bead (Or smaller) onto the hook and position at the eye. (NB: The hook barb will need compressing down if any bead smaller than 2mm is used)
STEP 2 : Catch in a length of Fine Silver wire as the thread is wound down the hookshank. Finish winding the thread opposite the barb.
STEP 3 : Wind the thread back and forth up the hookshank until a nice uniform body is created. Finish the thread just in front of the eye..
STEP 4 : Wind the wire up the body to create a rib. Finish just short of the eye, tie off with thread and trim waste..
STEP 5 : Catch in a black peacock herl (Tip first) where the wire was tied off and wind the herl with 4 to 5 turns. Secure with thread, trim waste and whip finish.
The finished Tiny Miracle Nymph